 |
Premium Deutsch J1939 to OBD II Vehicle Diagnostic Cable
Product Details:
| Certification: | ISO9001, CE, CCC, RoHS, VDE |
Payment & Shipping Terms:
| Minimum Order Quantity: | 5,000 |
|---|---|
| Price: | 20 |
|
Detail Information |
|||
| Voltage: | DC 300V | Contact Resistance: | 3.0 Ohm MAX |
|---|---|---|---|
| Conductor Material: | Copper | Sheath Material: | PVC |
| Insulation Material: | XLPE | Material Shape: | Flat Wire |
| Working Temperature: | -20~80°C | Pitch: | 4mm |
| Vehicle Voltage: | 12V/24V | Connector Type: | Type A/B |
| Pin Count: | 16 | IP Rating: | IP68 |
| Vibration Resistance: | 20 G's At 10-2000Hz | Waterproof Depth: | 1.2 Meter For 24 Hours |
| Dimensions: | 40*30*23 | ||
| Highlight: | Deutsch J1939 to OBD II cable,vehicle diagnostic wiring harness,OBD II diagnostic cable with warranty |
||
Product Description
Premium Deutsch J1939 to OBD II Vehicle Diagnostic Cable
Deutsch J1939 Male to OBD II SAE J1962 Female automotive cable assembly designed for heavy-duty vehicle diagnostics and communication systems.
Voltage Rating: DC 300V 5m ohm/10 ms
Contact Resistance: 3.0 ohm MAX
Testing: 100% open, short, and mis-wire testing
SAE Standards Compliance
- J1708 - Serial communications between ECUs on heavy duty vehicles
- J1850 - Serial data protocol with VPW/PWM variants
- J1939 - Data protocol for heavy duty commercial vehicles
- J1962 - Physical connector for OBD-II interface
- J1978 - Minimal operating standards for OBD-II scan tools
- J1979 - Standards for diagnostic test modes
- J2012 - Trouble codes and definitions
- J2178 Series - Network message standards and data parameters
- J2284-3 - 500 kbit/s CAN Physical and Data link layer
- J2411 - GMLAN (single-wire CAN) protocol for GM vehicles
J1962 Connector Specifications
The SAE J1962 specification provides two standardized hardware interfaces - Type A for 12V vehicles and Type B for 24V vehicles, featuring a 16-pin D-shaped connector design.
| Pin Number | Description |
|---|---|
| 1 | Manufacturer Discretionary |
| 2 | SAE J1850 Bus + (VPW / PWM) |
| 3 | Manufacturer Discretionary |
| 4 | Chassis Ground |
| 5 | Signal Ground |
| 6 | CAN High (ISO 15765-4 and SAE J2284) |
| 7 | ISO 9141-2 / ISO 14230-4 K Line |
| 8 | Manufacturer Discretionary |
| 9 | Manufacturer Discretionary |
| 10 | SAE J1850 Bus - (PWM-only) |
| 11 | Manufacturer Discretionary |
| 12 | Manufacturer Discretionary |
| 13 | Manufacturer Discretionary |
| 14 | CAN Low (ISO 15765-4 and SAE J2284) |
| 15 | ISO 9141-2 / ISO 14230-4 L Line (Optional) |
| 16 | Vehicle Battery Power: Type A 12V/4A, Type B 24V/2A |
Technical Specifications
Material: PA66, tinned plated compliant ROHS
Working Temperature: -20°C to 80°C
Over-molding: Customized
Pitch: 4mm
Voltage: 12V for cars, 24V for heavy vehicles
DEUTSCH HD10 Series Connector
Environmentally sealed thermoplastic cylindrical connector designed for heavy-duty applications in trucks, buses, cross-country vehicles, cranes, and forklifts. Provides protection against water, dust, oils, fuel, road salt, and other contaminants.
Temperature Range: -40°C to +125°C
Vibration Resistance: 20 G's at 10-2000Hz for 2 hours
IP Rating: IP68 - waterproof up to 1.2 meters for 24 hours
| Cavity | Overall Length A | Overall Height ØB | Overall Length C | Overall Height ØD |
|---|---|---|---|---|
| 3 | 1.609 (40.87) | 1.069 (27.15) | 1.639 (41.63) | 0.851 (21.62) |
| 4 | 1.639 (41.63) | 1.595 (40.51) | 1.639 (41.63) | 1.281 (32.54) |
| 5 | 1.609 (40.87) | 1.218 (30.94) | 1.639 (41.63) | 1.001 (25.43) |
| 6 | 1.619 (41.12) | 1.453 (36.91) | 1.639 (41.63) | 1.141 (28.98) |
| 9 | 1.609 (40.87) | 1.593 (40.47) | 1.639 (41.63) | 1.281 (32.54) |
| Position | Contact Size | Rear Threads | Plug | Receptacle Inline | Receptacle Flange |
|---|---|---|---|---|---|
| 3 | 16 | no | HD16-3-16S | HD14-3-16P | - |
| 3 | 16 | yes | HD16-3-96S | HD14-3-96P | HD10-3-96P |
| 4 | 4/16 | yes | HD16-4-4S | - | HD10-4-4P |
| 5 | 16 | no | HD16-5-16S | HD14-5-16P | HD10-5-16P |
| 6 | 16 | yes | HD16-6-96S | HD14-6-96P | HD10-6-96P |
| 6 | 12 | yes | HD16-6-12S-B010 | HD14-6-12P | HD10-6-12P |
| 9 | 16 | no | HD16-9-16S | HD14-9-16P | HD10-9-16P |
| 9 | 16 | yes | HD16-9-96S | HD14-9-96P | HD10-9-96P |
| 9 (J1939) | 16 | yes | HD16-9-1939S | HD14-9-1939P | HD10-9-1939P |
Company Profile
- Privately held company established in 1999
- Sales volume over 16 Million USD since 2017
- OEM & ODM company with 250+ employees
- 7,260 square-meter manufacturing facility
- Specialized in economical solutions and innovative wire harness design
- IATF16949 (2016) & ISO 9001 (2015) certified
- UL certified supplier with wiring No. E468011 & cable No. E479323
Certifications
Frequently Asked Questions
Can you help with design?
Yes, we are an ODM/OEM company specializing in wire harness and cable assembly since 1999.
When do you start design assistance?
We provide initial solution sketches for discussion, then begin detailed design after quotation and order confirmation.
How do you handle quality issues?
Our quality and engineering teams respond to quality issues within 72 hours, committed to long-term customer relationships and superior service.
Do you have standard products to reduce lead time and tooling costs?
Yes, we maintain over 1000 sets of molds and 5000+ products with 20+ years of wire harness specialization.
Contact Us
For more information about our Premium Deutsch J1939 to OBD II Vehicle Diagnostic Cable and other wire harness solutions, please contact our sales team.
Want to Know more details about this product