 |
Premium Deutsch Black J1939 to OBD II Connector Cable for Vehicles
Product Details:
| Certification: | ISO9001, CE, CCC, RoHS, VDE |
Payment & Shipping Terms:
| Minimum Order Quantity: | 5,000 |
|---|---|
| Price: | 50 |
|
Detail Information |
|||
| Voltage: | DC 300V | Contact Resistance: | 3.0 Ohm MAX |
|---|---|---|---|
| Conductor Material: | Copper | Sheath Material: | PVC |
| Insulation Material: | XLPE | Material Shape: | Flat Wire |
| Working Temperature: | -20~80°C | Pitch: | 4mm |
| Vehicle Voltage: | 12V/24V | Operating Temperature: | -40ºC To +125ºC |
| Vibration Resistance: | 20 G's At 10-2000Hz | Waterproof Rating: | IP68 |
| Immersion Depth: | 1.2 Meter For 24 Hours | Connector Type: | Deutsch HD10 Series |
| Pin Count: | 16-pin | ||
| Highlight: | Deutsch J1939 to OBD II cable,vehicle diagnostic connector cable,black OBD II wiring harness |
||
Product Description
Premium Deutsch Black J1939 to OBD II Connector Cable
Deutsch black J1939 Female to OBD II SAE J1962 Female automotive cable assembly designed for heavy-duty vehicle diagnostics and communication systems.
Voltage Rating: DC 300V 5m ohm/10 ms
Contact Resistance: 3.0 ohm MAX
Quality Testing: 100% open, short, and mis-wire testing
SAE Standards Compliance
- J1708: Serial communications between ECUs on heavy duty vehicles
- J1850: Serial data protocol (10.4 kbit/s VPW or 41.6 kbit/s PWM)
- J1939: Data protocol for heavy duty commercial vehicles
- J1962: Physical connector specification for OBD-II interface
- J1978: Minimal operating standards for OBD-II scan tools
- J1979: Standards for diagnostic test modes
- J2012: Trouble codes and definitions standards
- J2178 Series: Network message standards and data parameters
- J2284-3: 500 kbit/s CAN Physical and Data link layer
- J2411: GMLAN (single-wire CAN) protocol for newer GM vehicles
J1962 Connector Specifications
The SAE J1962 specification provides two standardized hardware interfaces: Type A for 12V vehicles and Type B for 24V vehicles. Both feature 16-pin D-shaped female connectors with keyed grooves to prevent incorrect mating.
| Pin Number | Description |
|---|---|
| 1 | Manufacturer Discretionary |
| 2 | SAE J1850 Bus + (VPW/PWM) |
| 3 | Manufacturer Discretionary |
| 4 | Chassis Ground |
| 5 | Signal Ground |
| 6 | CAN High (ISO 15765-4 and SAE J2284) |
| 7 | ISO 9141-2 / ISO 14230-4 K Line |
| 8 | Manufacturer Discretionary |
| 9 | Manufacturer Discretionary |
| 10 | SAE J1850 Bus - (PWM-only) |
| 11 | Manufacturer Discretionary |
| 12 | Manufacturer Discretionary |
| 13 | Manufacturer Discretionary |
| 14 | CAN Low (ISO 15765-4 and SAE J2284) |
| 15 | ISO 9141-2 / ISO 14230-4 L Line (Optional) |
| 16 | Vehicle Battery Power: Type A 12V/4A, Type B 24V/2A |
Technical Specifications
Material: PA66, tinned plated ROHS compliant
Working Temperature: -20°C to 80°C
Over-molding: Customized solutions available
Pitch: 4mm
Voltage: 12V for cars, 24V for heavy vehicles
DEUTSCH HD10 Series Connector
The HD series features environmentally sealed, thermoplastic cylindrical connectors designed for heavy-duty applications in trucks, buses, cross-country vehicles, cranes, and forklifts. Provides protection against water, dust, oils, fuel, road salt, and other contaminants.
- Temperature Range: -40°C to +125°C, withstands 20 test cycles
- Vibration Resistance: 20 G's at 10-2000Hz for 2 hours in three planes
- IP Rating: IP68 waterproof - withstands immersion under 1.2 meters for 24 hours
HD10 Series Dimensions
| Cavity | Length A (in/mm) | Height ØB (in/mm) | Length C (in/mm) | Height ØD (in/mm) |
|---|---|---|---|---|
| 3 | 1.609 (40.87) | 1.069 (27.15) | 1.639 (41.63) | 0.851 (21.62) |
| 4 | 1.639 (41.63) | 1.595 (40.51) | 1.639 (41.63) | 1.281 (32.54) |
| 5 | 1.609 (40.87) | 1.218 (30.94) | 1.639 (41.63) | 1.001 (25.43) |
| 6 | 1.619 (41.12) | 1.453 (36.91) | 1.639 (41.63) | 1.141 (28.98) |
| 9 | 1.609 (40.87) | 1.593 (40.47) | 1.639 (41.63) | 1.281 (32.54) |
HD10 Series Product Codes
| Position | Contact Size | Rear Threads | Plug | Receptacle Inline | Receptacle Flange |
|---|---|---|---|---|---|
| 3 | 16 | no | HD16-3-16S | HD14-3-16P | - |
| 3 | 16 | yes | HD16-3-96S | HD14-3-96P | HD10-3-96P |
| 4 | 4/16 | yes | HD16-4-4S | - | HD10-4-4P |
| 5 | 16 | no | HD16-5-16S | HD14-5-16P | HD10-5-16P |
| 6 | 16 | yes | HD16-6-96S | HD14-6-96P | HD10-6-96P |
| 6 | 12 | yes | HD16-6-12S-B010 | HD14-6-12P | HD10-6-12P |
| 9 | 16 | no | HD16-9-16S | HD14-9-16P | HD10-9-16P |
| 9 | 16 | yes | HD16-9-96S | HD14-9-96P | HD10-9-96P |
| 9 (J1939) | 16 | yes | HD16-9-1939S | HD14-9-1939P | HD10-9-1939P |
Company Profile
- Privately held company established in 1999
- Sales volume exceeding 16 Million USD since 2017
- OEM & ODM specialist with 250+ employees across 7,260 square meters
- Specialized in economical solutions and innovative wire harness design
- IATF16949 (2016) & ISO 9001 (2015) certified
- UL certified supplier with wiring No. E468011 & cable No. E479323
Certifications
Frequently Asked Questions
Can you help with design?
Yes, we are an ODM/OEM company specializing in wire harness and cable assembly since 1999.
When do you start design assistance?
We provide initial solution sketches for discussion, then begin detailed design after quotation and order confirmation.
How do you handle quality issues?
Our quality and engineering teams respond to issues within 72 hours, committed to long-term partnerships and superior service.
Do you have standard products to reduce lead times?
Yes, we maintain over 1000 mold sets and 5000+ products, with 20+ years of wire harness specialization.
Contact Us
For more information about our Deutsch J1939 to OBD II connector cables and custom solutions, please contact our technical team.
Want to Know more details about this product