 |
Premium J1939 to OBD II Cable Assembly for Vehicles
Product Details:
| Certification: | ISO9001, CE, CCC, RoHS, VDE |
Payment & Shipping Terms:
| Minimum Order Quantity: | 5,000 |
|---|---|
| Price: | 100 |
|
Detail Information |
|||
| Voltage: | DC 300V | Contact Resistance: | 3.0 Ohm MAX |
|---|---|---|---|
| Conductor Material: | Copper | Sheath Material: | PVC |
| Insulation Material: | XLPE | Material Shape: | Flat Wire |
| Working Temperature: | -20~80°C | Pitch: | 4mm |
| Vehicle Voltage: | 12V For Car, 24V For Heavy Vehicle | Connector Type: | SAE J1962 Female |
| Connector Pins: | 16-pin | Operating Temperature: | -40ºC To +125ºC |
| IP Rating: | IP68 | Vibration Resistance: | 20 G's At 10-2000Hz |
| Waterproof Depth: | 1.2 Meter For 24 Hours | ||
| Highlight: | J1939 to OBD II cable,vehicle diagnostic cable assembly,OBD II wiring harness |
||
Product Description
Premium J1939 to OBD II Cable Assembly
Deutsch Gray J1939 Female to OBD II SAE J1962 Female automotive cable assembly designed for heavy-duty vehicle diagnostics and communication systems.
Key Specifications:
Voltage: DC 300V 5m ohm/10 ms
Contact Resistance: 3.0 ohm MAX
100% Open, Short, Mis-Wire Testing
SAE Standards Compliance
- J1708 - Defines serial communications between ECUs on heavy duty vehicles
- J1850 - Defines serial data protocol with VPW/PWM variants
- J1939 - Defines data protocol for heavy duty commercial vehicles
- J1962 - Defines physical connector for OBD-II interface
- J1978 - Defines minimal operating standards for OBD-II scan tools
- J1979 - Defines standards for diagnostic test modes
- J2012 - Defines trouble codes and definitions
- J2178 Series - Network message standards and data parameters
- J2284-3 - Defines 500 kbit/s CAN Physical and Data link layer
- J2411 - Describes GMLAN protocol for newer GM vehicles
J1962 Connector Specifications
The SAE J1962 specification provides two standardized hardware interfaces: Type A for 12V vehicles and Type B for 24V vehicles. Both feature 16-pin D-shaped connectors with type-specific groove configurations to prevent incorrect mating.
| Pin Number | Description |
|---|---|
| 1 | Manufacturer Discretionary |
| 2 | SAE J1850 Bus + (VPW / PWM) |
| 3 | Manufacturer Discretionary |
| 4 | Chassis Ground |
| 5 | Signal Ground |
| 6 | CAN High (ISO 15765-4 and SAE J2284) |
| 7 | ISO 9141-2 / ISO 14230-4 K Line |
| 8 | Manufacturer Discretionary |
| 9 | Manufacturer Discretionary |
| 10 | SAE J1850 Bus - (PWM-only) |
| 11 | Manufacturer Discretionary |
| 12 | Manufacturer Discretionary |
| 13 | Manufacturer Discretionary |
| 14 | CAN Low (ISO 15765-4 and SAE J2284) |
| 15 | ISO 9141-2 / ISO 14230-4 L Line (Optional) |
| 16 | Vehicle Battery Power: Type A 12V/4A, Type B 24V/2A |
Material: PA66, tined plated compliant ROHS
Working Temperature: -20°C to 80°C
Over-molding: Customized
Pitch: 4mm
Voltage: 12V for cars and 24V for heavy vehicles
DEUTSCH HD10 Series Connector
The HD series features environmentally sealed, thermoplastic cylindrical connectors designed for faster, easier assembly in heavy-duty industries including trucks, buses, cross-country vehicles, cranes, and forklifts. Provides complete protection from water, dust, oils, fuel, road salt, and other contaminants.
- Operating temperature range: -40°C to +125°C
- No cracking, chipping or leaking after 20 test cycles from -40°C to +125°C
- Withstands sinusoidal vibration levels of 20 G's at 10 to 2000Hz
- IP68 rating - waterproof withstands immersion under 1.2 meters of water for 24 hours
| Cavity | Overall Length A | Overall Height ØB | Overall Length C | Overall Height ØD |
|---|---|---|---|---|
| 3 | 1.609 (40.87) | 1.069 (27.15) | 1.639 (41.63) | 0.851 (21.62) |
| 4 | 1.639 (41.63) | 1.595 (40.51) | 1.639 (41.63) | 1.281 (32.54) |
| 5 | 1.609 (40.87) | 1.218 (30.94) | 1.639 (41.63) | 1.001 (25.43) |
| 6 | 1.619 (41.12) | 1.453 (36.91) | 1.639 (41.63) | 1.141 (28.98) |
| 9 | 1.609 (40.87) | 1.593 (40.47) | 1.639 (41.63) | 1.281 (32.54) |
HD10 Series Configuration
| Position | Contact Size | Rear Threads | Plug | Receptacle Inline | Receptacle Flange |
|---|---|---|---|---|---|
| 3 | 16 | no | HD16-3-16S | HD14-3-16P | - |
| 3 | 16 | yes | HD16-3-96S | HD14-3-96P | HD10-3-96P |
| 4 | 4/16 | yes | HD16-4-4S | - | HD10-4-4P |
| 5 | 16 | no | HD16-5-16S | HD14-5-16P | HD10-5-16P |
| 6 | 16 | yes | HD16-6-96S | HD14-6-96P | HD10-6-96P |
| 6 | 12 | yes | HD16-6-12S-B010 | HD14-6-12P | HD10-6-12P |
| 9 | 16 | no | HD16-9-16S | HD14-9-16P | HD10-9-16P |
| 9 | 16 | yes | HD16-9-96S | HD14-9-96P | HD10-9-96P |
| 9 (J1939) | 16 | yes | HD16-9-1939S | HD14-9-1939P | HD10-9-1939P |
Company Profile
- Privately held company, established in 1999
- Sales volume over 16 Million USD since 2017
- OEM & ODM company with 250+ employees across 7260 square meters
- Specialized in economical solutions and innovative wire harness design & manufacturing
- IATF16949 (2016) & ISO 9001 (2015) certified
- UL certified supplier with wiring No. E468011 & cable No. E479323
Certifications
Frequently Asked Questions
Can you help with design?
Yes, we are an ODM/OEM company specializing in wire harness and cable assembly since 1999.
When will you start to help design?
We provide initial solution sketches for discussion. After quotation and order placement, we proceed with detailed drawings and client confirmation.
What if quality issues occur?
Our quality and engineering teams respond to quality issues within 72 hours, committed to long-term partnerships and superior service.
Do you have standard products to reduce lead time and tooling costs?
Yes, we maintain over 1000 sets of molds, many of which can be used directly for customer projects. With 20+ years of specialization and 5000+ products.
Contact Us
For more information about our Premium J1939 to OBD II Cable Assembly and other wire harness solutions, please contact our sales team.
Want to Know more details about this product