 |
Premium J1939 to OBD II Connector Cable for Vehicles
Product Details:
| Certification: | ISO9001, CE, CCC, RoHS, VDE |
Payment & Shipping Terms:
| Minimum Order Quantity: | 5,000 |
|---|---|
| Price: | 35 |
|
Detail Information |
|||
| Voltage: | DC 300V | Contact Resistance: | 3.0 Ohm MAX |
|---|---|---|---|
| Conductor Material: | Copper | Sheath Material: | PVC |
| Insulation Material: | XLPE | Material Shape: | Flat Wire |
| Working Temperature: | -20~80°C | Pitch: | 4mm |
| Vehicle Voltage: | 12V For Car, 24V For Heavy Vehicle | Operating Temperature: | -40ºC To +125ºC |
| Vibration Resistance: | 20 G's At 10 To 2000Hz | IP Rating: | IP68 |
| Waterproof Depth: | 1.2 Meter For 24 Hours | Connector Type: | Deutsch HD10 Series |
| Pin Description: | 16-pin D-shaped | ||
| Highlight: | J1939 to OBD II cable,vehicle diagnostic connector cable,OBD II wiring harness |
||
Product Description
Premium J1939 to OBD II Connector Cable for Vehicles
Deutsch J1939 Female to OBD II SAE J1962 automotive cable assembly
Voltage: DC 300V 5m ohm/10 ms
Contact Resistance: 3.0 ohm MAX
Testing: 100% open, short, and mis-wire testing
SAE Standards Documentation
- J1708 - Defines serial communications between ECUs on heavy duty vehicles
- J1850 - Defines serial data protocol with VPW/PWM variants
- J1939 - Defines data protocol for heavy duty commercial vehicles
- J1962 - Defines physical connector for OBD-II interface
- J1978 - Defines minimal operating standards for OBD-II scan tools
- J1979 - Defines standards for diagnostic test modes
- J2012 - Defines trouble codes and definitions
- J2178-1 - Defines network message header formats
- J2178-2 - Provides data parameter definitions
- J2178-3 - Defines frame IDs for single byte headers
- J2178-4 - Defines messages with three byte headers
- J2284-3 - Defines 500 kbit/s CAN physical and data link layer
- J2411 - Describes GMLAN protocol for newer GM vehicles
J1962 Connector Specifications
The SAE J1962 specification provides two standardized hardware interfaces - Type A (12V vehicles) and Type B (24V vehicles). Both feature 16-pin D-shaped connectors with type B having an interrupted groove to prevent incorrect mating.
| Pin Number | Description |
|---|---|
| 1 | Manufacturer Discretionary |
| 2 | SAE J1850 Bus + (VPW/PWM) |
| 3 | Manufacturer Discretionary |
| 4 | Chassis Ground |
| 5 | Signal Ground |
| 6 | CAN High (ISO 15765-4 and SAE J2284) |
| 7 | ISO 9141-2 / ISO 14230-4 K Line |
| 8 | Manufacturer Discretionary |
| 9 | Manufacturer Discretionary |
| 10 | SAE J1850 Bus - (PWM-only) |
| 11 | Manufacturer Discretionary |
| 12 | Manufacturer Discretionary |
| 13 | Manufacturer Discretionary |
| 14 | CAN Low (ISO 15765-4 and SAE J2284) |
| 15 | ISO 9141-2 / ISO 14230-4 L Line (Optional) |
| 16 | Vehicle Battery Power: Type A 12V/4A, Type B 24V/2A |
Material: PA66, tinned plated compliant ROHS
Working Temperature: -20°C to 80°C
Over-molding: Customized
Pitch: 4mm
Voltage: 12V for cars, 24V for heavy vehicles
DEUTSCH HD10 Series Connector
The HD series features environmentally sealed, thermoplastic cylindrical connectors designed for heavy-duty applications in trucks, buses, cross-country vehicles, cranes, and forklifts. Provides protection against water, dust, oils, fuel, road salt, grease, and other contaminants.
- Operating temperature range: -40°C to +125°C
- Withstands 20 test cycles from -40°C to +125°C without cracking, chipping, or leaking
- No mechanical damage after 20 G's vibration testing at 10-2000Hz for 2 hours
- IP68 rating - waterproof up to 1.2 meters for 24 hours
| Cavity | Overall Length A | Overall Height ØB | Overall Length C | Overall Height ØD |
|---|---|---|---|---|
| 3 | 1.609 (40.87) | 1.069 (27.15) | 1.639 (41.63) | 0.851 (21.62) |
| 4 | 1.639 (41.63) | 1.595 (40.51) | 1.639 (41.63) | 1.281 (32.54) |
| 5 | 1.609 (40.87) | 1.218 (30.94) | 1.639 (41.63) | 1.001 (25.43) |
| 6 | 1.619 (41.12) | 1.453 (36.91) | 1.639 (41.63) | 1.141 (28.98) |
| 9 | 1.609 (40.87) | 1.593 (40.47) | 1.639 (41.63) | 1.281 (32.54) |
| Position | Contact Size | Rear Threads | Plug | Receptacle Inline | Receptacle Flange |
|---|---|---|---|---|---|
| 3 | 16 | no | HD16-3-16S | HD14-3-16P | - |
| 3 | 16 | yes | HD16-3-96S | HD14-3-96P | HD10-3-96P |
| 4 | 4/16 | yes | HD16-4-4S | - | HD10-4-4P |
| 5 | 16 | no | HD16-5-16S | HD14-5-16P | HD10-5-16P |
| 6 | 16 | yes | HD16-6-96S | HD14-6-96P | HD10-6-96P |
| 6 | 12 | yes | HD16-6-12S-B010 | HD14-6-12P | HD10-6-12P |
| 9 | 16 | no | HD16-9-16S | HD14-9-16P | HD10-9-16P |
| 9 | 16 | yes | HD16-9-96S | HD14-9-96P | HD10-9-96P |
| 9 (J1939) | 16 | yes | HD16-9-1939S | HD14-9-1939P | HD10-9-1939P |
Company Profile
- Privately held company established in 1999
- Sales volume over 16 Million USD since 2017
- OEM & ODM company with 250+ employees
- 7,260 square-meter facility
- Specialized in economical solutions and innovative wire harness design
- IATF16949 (2016) ISO 9001 (2015) UL Certified
- UL wiring No. E468011 & cable No. E479323
Certifications
Frequently Asked Questions
Can you help with design?
Yes, we are an ODM/OEM company specializing in wire harness and cable assembly since 1999.
When do you start design work?
We provide initial design concepts for discussion. After quotation and order placement, we proceed with detailed drawings and final client confirmation.
How do you handle quality issues?
Our quality and engineering teams respond to quality issues within 72 hours. We are committed to long-term partnerships and providing exceptional service.
Do you have standard products to reduce lead times?
Yes, we maintain over 1000 sets of molds, many of which can be used directly for customer projects. With over 20 years of experience and 5000+ products, we can expedite prototype development.
Contact Us
For more information about our Premium J1939 to OBD II Connector Cables and other wiring solutions, please contact our sales team.
Want to Know more details about this product