 |
High-Performance J1939 to OBD II Diagnostic Cable Assembly
Product Details:
Payment & Shipping Terms:
| Minimum Order Quantity: | 5,000 |
|---|---|
| Price: | 100 |
|
Detail Information |
|||
| Voltage: | DC 300V | Contact Resistance: | 3.0 Ohm MAX |
|---|---|---|---|
| Operating Temperature: | -40ºC To +125ºC | Vibration Resistance: | 20 G's At 10-2000Hz |
| IP Rating: | IP68 | Waterproof Depth: | 1.2 Meter For 24 Hours |
| Cavity 3 Length: | 1.609 In (40.87 Mm) | Cavity 3 Height: | 1.069 In (27.15 Mm) |
| Cavity 4 Length: | 1.639 In (41.63 Mm) | Cavity 4 Height: | 1.595 In (40.51 Mm) |
| Cavity 5 Length: | 1.609 In (40.87 Mm) | Cavity 5 Height: | 1.218 In (30.94 Mm) |
| Cavity 6 Length: | 1.619 In (41.12 Mm) | Cavity 6 Height: | 1.453 In (36.91 Mm) |
| Cavity 9 Length: | 1.609 In (40.87 Mm) | ||
| Highlight: | J1939 to OBD II diagnostic cable,OBD II diagnostic cable assembly,J1939 wiring harness with warranty |
||
Product Description
High-Performance J1939 to OBD II Diagnostic Cable Assembly
TE connectivity HD series J1939 to OBD II SAE J1962 automotive diagnostic cable assembly
Key Specifications:
- Voltage: DC 300V 5m ohm/10 ms
- Contact Resistance: 3.0 ohm MAX
- 100% open, short, and mis-wire testing
SAE Standards Documentation
- J1708 - Defines serial communications between ECUs on heavy duty vehicles
- J1850 - Defines serial data protocol with VPW and PWM variants
- J1939 - Defines data protocol for heavy duty commercial vehicles
- J1962 - Defines physical connector for OBD-II interface
- J1978 - Defines minimal operating standards for OBD-II scan tools
- J1979 - Defines standards for diagnostic test modes
- J2012 - Defines trouble codes and definitions
- J2178-1 - Defines network message header formats
- J2178-2 - Provides data parameter definitions
- J2178-3 - Defines network message frame IDs for single byte headers J2178-4 - Defines network messages with three byte headers
- J2284-3 - Defines 500 kbit/s CAN Physical and Data link layer
- J2411 - Describes GMLAN protocol used in newer GM vehicles
DEUTSCH HD10 Series Connector
The HD series is an environmentally sealed, thermoplastic cylindrical connector designed for faster, easier assembly in heavy-duty industries including trucks, buses, cross-country vehicles, cranes, and forklifts. When mated, contacts are protected from water, dust, lubricating oils, fuel, road salt, grease, mud, and other contaminants.
Performance Features:
- Operating temperature range: -40ºC to +125ºC
- No cracking, chipping, or leaking after 20 test cycles from -40ºC to +125ºC
- No unlocking or unmating after sinusoidal vibration levels of 20 G's at 10 to 2000Hz
- IP68 rating - waterproof withstands immersion under 1.2 meters of water for 24 hours
Connector Dimensions
| Cavity | Overall Length A (mm) | Overall Height ØB (mm) | Overall Length C (mm) | Overall Height ØD (mm) |
|---|---|---|---|---|
| 3 | 40.87 | 27.15 | 41.63 | 21.62 |
| 4 | 41.63 | 40.51 | 41.63 | 32.54 |
| 5 | 40.87 | 30.94 | 41.63 | 25.43 |
| 6 | 41.12 | 36.91 | 41.63 | 28.98 |
| 9 | 40.87 | 40.47 | 41.63 | 32.54 |
HD10 Series Configuration
| Position | Contact Size | Rear Threads | Plug | Receptacle Inline | Receptacle Flange |
|---|---|---|---|---|---|
| 3 | 16 | no | HD16-3-16S | HD14-3-16P | - |
| 3 | 16 | yes | HD16-3-96S | HD14-3-96P | HD10-3-96P |
| 4 | 4/16 | yes | HD16-4-4S | - | HD10-4-4P |
| 5 | 16 | no | HD16-5-16S | HD14-5-16P | HD10-5-16P |
| 6 | 16 | yes | HD16-6-96S | HD14-6-96P | HD10-6-96P |
| 6 | 12 | yes | HD16-6-12S-B010 | HD14-6-12P | HD10-6-12P |
| 9 | 16 | no | HD16-9-16S | HD14-9-16P | HD10-9-16P |
| 9 | 16 | yes | HD16-9-96S | HD14-9-96P | HD10-9-96P |
| 9 (J1939) | 16 | yes | HD16-9-1939S | HD14-9-1939P | HD10-9-1939P |
Company Profile
- Privately held company, established in 1999
- Sales volume over 16 Million USD since 2017
- OEM & ODM company with 250+ employees across 7260 square meters
- Specialized in economical solutions and innovative wire harness design & manufacturing
- IATF16949 (2016) & ISO 9001 (2015) certified
- UL certified supplier with wiring No. E468011 & cable No. E479323
Certifications
Frequently Asked Questions
Q: Can you help with design?
A: Yes, we are an ODM/OEM company specializing in wire harness & cable assembly since 1999.
Q: When will you start to help design?
A: We provide initial solution sketches for discussion. After quotation and order placement, we begin detailed drawing and confirm designs with clients.
Q: What if quality issues occur?
A: Our quality and engineering team responds to quality issues within 72 hours. We are committed to long-term partnerships and providing superior service.
Q: Do you have standard products to reduce lead time and tooling costs?
A: Yes, we maintain over 1000 sets of molds, many of which can be used directly for customer projects. Our team has over 20 years of experience with 5000+ products.
Contact Us
For more information about our High-Performance J1939 to OBD II Diagnostic Cable Assembly, please contact our sales team.
Want to Know more details about this product