 |
High-Performance J1939 to OBD II Diagnostic Cable for Vehicles
Product Details:
Payment & Shipping Terms:
| Minimum Order Quantity: | 5,000 |
|---|---|
| Price: | 100 |
|
Detail Information |
|||
| Voltage: | DC 300V | Contact Resistance: | 3.0 Ohm MAX |
|---|---|---|---|
| Working Temperature: | -20~80°C | Pitch: | 4mm |
| Vehicle Voltage: | 12V For Car, 24V For Heavy Vehicle | Connector Type: | J1939 Male To OBD II SAE J1962 Female |
| Material: | PA66, Tined Plated Compliant ROHS | Operating Temperature: | -40ºC To +125ºC |
| Vibration Resistance: | 20 G's At 10 To 2000Hz | Waterproof Rating: | IP68 |
| Immersion Resistance: | 1.2 Meter Of Water For 24 Hours | Connector Pitch: | 4mm |
| Pin Count: | 16-pin | Battery Power: | 12V/4A (Type A), 24V/2A (Type B) |
| CAN Speed: | 500 Kbit/s | ||
| Highlight: | J1939 to OBD II diagnostic cable,vehicle diagnostic cable with warranty,electronic wiring harness for vehicles |
||
Product Description
High-Performance J1939 to OBD II Diagnostic Cable for Vehicles
TE connectivity Gray J1939 Male to OBD II SAE J1962 Female automotive diagnostic cable assembly
Key Specifications:
• Voltage: DC 300V 5m ohm/10 ms
• Contact Resistance: 3.0 ohm MAX
• 100% Open, Short, Mis-Wire Testing
• Voltage: DC 300V 5m ohm/10 ms
• Contact Resistance: 3.0 ohm MAX
• 100% Open, Short, Mis-Wire Testing
SAE Standards Documentation
- J1708 - Defines serial communications between ECUs on heavy duty vehicles
- J1850 - Defines serial data protocol with VPW/PWM variants
- J1939 - Data protocol for heavy duty commercial vehicles
- J1962 - Physical connector for OBD-II interface
- J1978 - Minimal operating standards for OBD-II scan tools
- J1979 - Standards for diagnostic test modes
- J2012 - Standards for trouble codes and definitions
- J2178-1 - Network message header formats and physical address assignments
- J2178-2 - Data parameter definitions
- J2178-3 - Network message frame IDs for single byte headers
- J2178-4 - Network messages with three byte headers
- J2284-3 - 500 kbit/s CAN Physical and Data link layer
- J2411 - GMLAN protocol for newer GM vehicles
J1962 Connector Specifications
The SAE J1962 specification provides two standardized hardware interfaces (Type A and Type B) with 16-pin D-shaped connectors. Type A is for 12V vehicles, Type B for 24V vehicles with blue marking.
| Pin Number | Description |
|---|---|
| 1 | Manufacturer Discretionary |
| 2 | SAE J1850 Bus + (VPW / PWM) |
| 3 | Manufacturer Discretionary |
| 4 | Chassis Ground |
| 5 | Signal Ground |
| 6 | CAN High (ISO 15765-4 and SAE J2284) |
| 7 | ISO 9141-2 / ISO 14230-4 K Line |
| 8 | Manufacturer Discretionary |
| 9 | Manufacturer Discretionary |
| 10 | SAE J1850 Bus - (PWM-only) |
| 11 | Manufacturer Discretionary |
| 12 | Manufacturer Discretionary |
| 13 | Manufacturer Discretionary |
| 14 | CAN Low (ISO 15765-4 and SAE J2284) |
| 15 | ISO 9141-2 / ISO 14230-4 L Line (Optional) |
| 16 | Vehicle Battery Power: Type A 12V/4A, Type B 24V/2A |
Material & Technical Specifications:
• Material: PA66, tined plated compliant ROHS
• Working Temperature: -20°C to 80°C
• Over-molding: Customized
• Pitch: 4mm
• Voltage: 12V for cars, 24V for heavy vehicles
• Material: PA66, tined plated compliant ROHS
• Working Temperature: -20°C to 80°C
• Over-molding: Customized
• Pitch: 4mm
• Voltage: 12V for cars, 24V for heavy vehicles
DEUTSCH HD10 Series Connector
Environmentally sealed thermoplastic cylindrical connector designed for heavy-duty applications in trucks, buses, cross-country vehicles, cranes, and forklifts. Provides protection against water, dust, oils, fuel, road salt, and other contaminants.
- Operating Temperature: -40°C to +125°C
- No cracking, chipping or leaking after 20 test cycles
- Withstands 20 G's vibration at 10-2000Hz for 2 hours
- IP68 rating - waterproof up to 1.2 meters for 24 hours
| Cavity | Overall Length A | Overall Height ØB | Overall Length C | Overall Height ØD |
|---|---|---|---|---|
| 3 | 1.609 (40.87) | 1.069 (27.15) | 1.639 (41.63) | 0.851 (21.62) |
| 4 | 1.639 (41.63) | 1.595 (40.51) | 1.639 (41.63) | 1.281 (32.54) |
| 5 | 1.609 (40.87) | 1.218 (30.94) | 1.639 (41.63) | 1.001 (25.43) |
| 6 | 1.619 (41.12) | 1.453 (36.91) | 1.639 (41.63) | 1.141 (28.98) |
| 9 | 1.609 (40.87) | 1.593 (40.47) | 1.639 (41.63) | 1.281 (32.54) |
| Position | Contact Size | Rear Threads | Plug | Receptacle Inline | Receptacle Flange |
|---|---|---|---|---|---|
| 3 | 16 | no | HD16-3-16S | HD14-3-16P | - |
| 3 | 16 | yes | HD16-3-96S | HD14-3-96P | HD10-3-96P |
| 4 | 4/16 | yes | HD16-4-4S | - | HD10-4-4P |
| 5 | 16 | no | HD16-5-16S | HD14-5-16P | HD10-5-16P |
| 6 | 16 | yes | HD16-6-96S | HD14-6-96P | HD10-6-96P |
| 6 | 12 | yes | HD16-6-12S-B010 | HD14-6-12P | HD10-6-12P |
| 9 | 16 | no | HD16-9-16S | HD14-9-16P | HD10-9-16P |
| 9 | 16 | yes | HD16-9-96S | HD14-9-96P | HD10-9-96P |
| 9 (J1939) | 16 | yes | HD16-9-1939S | HD14-9-1939P | HD10-9-1939P |
Company Profile
- Privately held company, established in 1999
- Sales volume over 16 Million USD since 2017
- OEM & ODM company with 250+ employees
- 7,260 square-meter facility
- Specialized in economical solutions and innovative wire harness design & manufacturing
- IATF16949 (2016) & ISO 9001 (2015) certified
- UL certified supplier with wiring No. E468011 & cable No. E479323
Certifications
Frequently Asked Questions
Q: Can you help with design?
A: Yes, we are an ODM/OEM company specializing in wire harness & cable assembly since 1999.
Q: When will you start to help design?
A: We provide initial solution sketches for discussion. After quotation and order placement, we proceed with detailed design drawings and client confirmation.
Q: What if quality issues occur?
A: Our quality and engineering team responds to quality issues within 72 hours. We are committed to long-term partnerships and providing excellent service.
Q: Do you have standard products to reduce lead time and tooling costs?
A: Yes, we maintain over 1000 sets of molds, many of which can be used directly for customer projects. With over 20 years of specialization, we offer 5000+ wire harness products.
Contact Us
For more information about our J1939 to OBD II diagnostic cables and custom wire harness solutions, please contact our technical team.
Want to Know more details about this product