 |
High-Quality J1939 to OBD II Female Diagnostic Cable
Λεπτομέρειες:
| Πιστοποίηση: | ISO9001, CE, CCC, RoHS, VDE |
Πληρωμής & Αποστολής Όροι:
| Ποσότητα παραγγελίας min: | 5.000 |
|---|---|
| Τιμή: | 50 |
|
Λεπτομερής ενημέρωση |
|||
| Δυναμικό: | Συνεχές ρεύμα 300V | Επικοινωνήστε με την Αντίσταση: | 3,0 ohm MAX |
|---|---|---|---|
| Υλικό αγωγού: | Χαλκός | υλικό θήκης: | PVC |
| Μονωτικό υλικό: | PVC | Σχήμα υλικού: | Στρογγυλό Σύρμα |
| Θερμοκρασία εργασίας: | -20~80°c | Πίσσα: | 4 χιλιοστά |
| Τετάρτη: | 12V για αυτοκίνητο, 24V για βαρύ όχημα | Θερμοκρασία λειτουργίας: | -40ºC σε +125ºC |
| Αντίσταση δόνησης: | 20 G στα 10 έως 2000 Hz | Αξιολόγηση IP: | IP68 |
| Αδιάβροχο βάθος: | 1,2 μέτρα για 24 ώρες | Τύπος σύνδεσης: | Σειρά Deutsch HD10 |
| Καταμέτρηση καρφιτσών: | 16 πινών | ||
| Επισημαίνω: | J1939 to OBD II cable,female diagnostic cable,OBD II wiring harness |
||
Περιγραφή προϊόντων
High-Quality J1939 to OBD II Female Diagnostic Cable
Deutsch Gray J1939 Female to OBD II SAE J1962 Female automotive cable assembly
- Voltage: DC 300V 5m ohm/10 ms
- Contact resistance: 3.0 ohm MAX
- 100% open, short, and mis-wire testing
SAE Standards Documentation
- J1708 - Defines serial communications between ECUs on heavy duty vehicles
- J1850 - Defines serial data protocol with VPW and PWM variants
- J1939 - Defines data protocol for heavy duty commercial vehicles
- J1962 - Defines physical connector for OBD-II interface
- J1978 - Defines minimal operating standards for OBD-II scan tools
- J1979 - Defines standards for diagnostic test modes
- J2012 - Defines trouble codes and definitions
- J2178-1 - Defines network message header formats
- J2178-2 - Provides data parameter definitions
- J2178-3 - Defines network message frame IDs for single byte headers
- J2178-4 - Defines network messages with three byte headers
- J2284-3 - Defines 500 kbit/s CAN Physical and Data link layer
- J2411 - Describes GMLAN protocol for newer GM vehicles
J1962 Connector Specifications
The SAE J1962 specification provides two standardized hardware interfaces: Type A and Type B. Both are 16-pin D-shaped female connectors. Type A is used for 12V vehicles, while Type B is used for 24V vehicles and features blue marking.
| Pin Number | Description |
|---|---|
| 1 | Manufacturer Discretionary |
| 2 | SAE J1850 Bus + (VPW / PWM) |
| 3 | Manufacturer Discretionary |
| 4 | Chassis Ground |
| 5 | Signal Ground |
| 6 | CAN High (ISO 15765-4 and SAE J2284) |
| 7 | ISO 9141-2 / ISO 14230-4 K Line |
| 8 | Manufacturer Discretionary |
| 9 | Manufacturer Discretionary |
| 10 | SAE J1850 Bus - (PWM-only) |
| 11 | Manufacturer Discretionary |
| 12 | Manufacturer Discretionary |
| 13 | Manufacturer Discretionary |
| 14 | CAN Low (ISO 15765-4 and SAE J2284) |
| 15 | ISO 9141-2 / ISO 14230-4 L Line (Optional) |
| 16 | Vehicle Battery Power: Type A 12V/4A, Type B 24V/2A |
Technical Specifications
- Material: PA66, tinned plated compliant ROHS
- Working temperature: -20°C to 80°C
- Over-molding: Customized
- Pitch: 4mm
- Voltage: 12V for cars and 24V for heavy vehicles
DEUTSCH HD10 Series Connector
The HD series is an environmentally sealed thermoplastic cylindrical connector designed for heavy-duty applications in trucks, buses, cross-country vehicles, cranes, and forklifts. Provides protection against water, dust, oils, fuel, salt, grease, and other contaminants.
- Operating temperature: -40°C to +125°C
- No cracking, chipping or leaking after 20 test cycles
- Withstands 20 G's vibration at 10-2000Hz for 2 hours
- IP68 rating - waterproof up to 1.2 meters for 24 hours
| Cavity | Overall Length A | Overall Height ØB | Overall Length C | Overall Height ØD |
|---|---|---|---|---|
| 3 | 1.609 (40.87) | 1.069 (27.15) | 1.639 (41.63) | 0.851 (21.62) |
| 4 | 1.639 (41.63) | 1.595 (40.51) | 1.639 (41.63) | 1.281 (32.54) |
| 5 | 1.609 (40.87) | 1.218 (30.94) | 1.639 (41.63) | 1.001 (25.43) |
| 6 | 1.619 (41.12) | 1.453 (36.91) | 1.639 (41.63) | 1.141 (28.98) |
| 9 | 1.609 (40.87) | 1.593 (40.47) | 1.639 (41.63) | 1.281 (32.54) |
HD10 Series Configuration
| Position | Contact Size | Rear Threads | Plug | Receptacle Inline | Receptacle Flange |
|---|---|---|---|---|---|
| 3 | 16 | no | HD16-3-16S | HD14-3-16P | - |
| 3 | 16 | yes | HD16-3-96S | HD14-3-96P | HD10-3-96P |
| 4 | 4/16 | yes | HD16-4-4S | - | HD10-4-4P |
| 5 | 16 | no | HD16-5-16S | HD14-5-16P | HD10-5-16P |
| 6 | 16 | yes | HD16-6-96S | HD14-6-96P | HD10-6-96P |
| 6 | 12 | yes | HD16-6-12S-B010 | HD14-6-12P | HD10-6-12P |
| 9 | 16 | no | HD16-9-16S | HD14-9-16P | HD10-9-16P |
| 9 | 16 | yes | HD16-9-96S | HD14-9-96P | HD10-9-96P |
| 9 (J1939) | 16 | yes | HD16-9-1939S | HD14-9-1939P | HD10-9-1939P |
Company Profile
- Privately held company, established in 1999
- Sales volume over 16 Million USD since 2017
- OEM & ODM company with 250+ employees
- 7,260 square-meter facility
- Specialized in economical solutions and innovative wire harness design
- IATF16949 (2016) & ISO 9001 (2015) certified
- UL certified supplier with wiring No. E468011 & cable No. E479323
Certifications
Frequently Asked Questions
Can you help with design?
Yes, we are an ODM/OEM company specializing in wire harness and cable assembly since 1999.
When will you start to help design?
We provide initial solutions for discussion, then begin detailed design after quotation and order confirmation.
What if quality issues occur?
Our quality and engineering team responds within 72 hours to resolve any quality issues promptly.
Do you have standard products to reduce lead time and tooling costs?
Yes, we maintain over 1000 sets of molds and 5000+ products with 20+ years of wire harness expertise.
Contact Us
For more information about our J1939 to OBD II diagnostic cables and custom wire harness solutions, please contact our sales team.
Θέλετε να μάθετε περισσότερες λεπτομέρειες σχετικά με αυτό το προϊόν