 |
High-Performance J1939 Diagnostic Cable Assembly by Te Connectivity
Detalhes do produto:
Condições de Pagamento e Envio:
| Quantidade de ordem mínima: | 5.000 |
|---|---|
| Preço: | 100 |
|
Informação detalhada |
|||
| Tensão: | C.C. 300V | Resistência de contato: | 3,0 ohm MÁX. |
|---|---|---|---|
| Temperatura operacional: | -40ºC a +125ºC | Resistência à vibração: | 20 g's em 10-2000Hz |
| Classificação IP: | IP68 | Profundidade impermeável: | 1,2 metro por 24 horas |
| Dimensões: | 40*30*23 | Tamanho da cavidade 3: | 40,87 mm x 27,15 mm x 41,63 mm x 21,62 mm |
| Tamanho da cavidade 4: | 41,63 mm x 40,51 mm x 41,63 mm x 32,54 mm | Tamanho da cavidade 5: | 40,87 mm x 30,94 mm x 41,63 mm x 25,43 mm |
| Tamanho da cavidade 6: | 41,12 mm x 36,91 mm x 41,63 mm x 28,98 mm | Tamanho da cavidade 9: | 40,87 mm x 40,47 mm x 41,63 mm x 32,54 mm |
| Tamanho do contato 16: | Série HD16 | Tamanho de contato 12: | HD16-6-12S-B010 |
| Capacidade de produção: | 1000000 PCs/mês | ||
| Destacar: | J1939 diagnostic cable assembly,Te Connectivity wiring harness,high-performance electronic wiring harness |
||
Descrição de produto
High-Performance J1939 Diagnostic Cable Assembly
TE Connectivity HD Series J1939 automotive diagnostic cable assembly designed for heavy-duty vehicle applications.
Electrical Specifications
- Voltage: DC 300V 5m ohm/10 ms
- Contact Resistance: 3.0 ohm MAX
- 100% Open, Short, Mis-Wire Testing
SAE Standards Compliance
- J1708 - Serial communications between ECUs on heavy duty vehicles
- J1850 - Serial data protocol (10.4 kbit/s VPW or 41.6 kbit/s PWM)
- J1939 - Data protocol for heavy duty commercial vehicles
- J1962 - Physical connector for OBD-II interface
- J1978 - Minimal operating standards for OBD-II scan tools
- J1979 - Standards for diagnostic test modes
- J2012 - Trouble codes and definitions
- J2178-1 - Network message header formats and physical address assignments
- J2178-2 - Data parameter definitions
- J2178-3 - Network message frame IDs for single byte headers
- J2178-4 - Network messages with three byte headers
- J2284-3 - 500 kbit/s CAN Physical and Data link layer
- J2411 - GMLAN (single-wire CAN) protocol for newer GM vehicles
DEUTSCH HD10 Series Connector Features
Environmentally sealed silicone rubber, thermoplastic cylindrical connector designed for faster, easier assembly in heavy-duty industries including trucks, buses, cross-country vehicles, cranes, and forklifts.
- Environmental Protection: Contacts protected from water, dust, lubricating oils, fuel, road salt, grease, mud and other contaminants
- Temperature Range: Operating at -40ºC to +125ºC, no cracking, chipping or leaking after 20 test cycles
- Vibration Resistance: No unlocking or unmating after sinusoidal vibration levels of 20 G's at 10 to 2000Hz in three planes for 2 hours
- IP68 Rating: Waterproof withstands immersion under 1.2 meters of water for 24 hours
Connector Dimensions
| Cavity | Overall Length A (mm) | Overall Height ØB (mm) | Overall Length C (mm) | Overall Height ØD (mm) |
|---|---|---|---|---|
| 3 | 40.87 | 27.15 | 41.63 | 21.62 |
| 4 | 41.63 | 40.51 | 41.63 | 32.54 |
| 5 | 40.87 | 30.94 | 41.63 | 25.43 |
| 6 | 41.12 | 36.91 | 41.63 | 28.98 |
| 9 | 40.87 | 40.47 | 41.63 | 32.54 |
HD10 Series Product Specifications
| Position | Contact Size | Rear Threads | Plug | Receptacle Inline | Receptacle Flange |
|---|---|---|---|---|---|
| 3 | 16 | no | HD16-3-16S | HD14-3-16P | - |
| 3 | 16 | yes | HD16-3-96S | HD14-3-96P | HD10-3-96P |
| 4 | 4/16 | yes | HD16-4-4S | - | HD10-4-4P |
| 5 | 16 | no | HD16-5-16S | HD14-5-16P | HD10-5-16P |
| 6 | 16 | yes | HD16-6-96S | HD14-6-96P | HD10-6-96P |
| 6 | 12 | yes | HD16-6-12S-B010 | HD14-6-12P | HD10-6-12P |
| 9 | 16 | no | HD16-9-16S | HD14-9-16P | HD10-9-16P |
| 9 | 16 | yes | HD16-9-96S | HD14-9-96P | HD10-9-96P |
| 9 (J1939) | 16 | yes | HD16-9-1939S | HD14-9-1939P | HD10-9-1939P |
Company Profile
- Privately held company, established in 1999
- Sales volume over 16 Million USD since 2017
- OEM & ODM company with 250+ employees, 7260 square-meter facility
- Specialized in economical solutions and innovative wire harness design & manufacturing
- IATF16949 (2016) & ISO 9001 (2015) certified
- UL certified supplier with wiring No. E468011 & cable No. E479323
Certifications
Frequently Asked Questions
Can you help with design?
Yes, we are an ODM/OEM company specializing in wire harness & cable assembly since 1999.
When do you start design assistance?
We provide initial design concepts for discussion. After quotation and order placement, we create detailed drawings and confirm with the client.
How do you handle quality issues?
Our quality and engineering teams respond to quality issues within 72 hours, committed to long-term partnerships and superior service.
Do you have standard products to reduce lead times and tooling costs?
Yes, we maintain over 1000 sets of molds, many of which can be used directly for customer projects. Our team has over 20 years of experience with 5000+ products.
Contact Us
For more information about our J1939 diagnostic cable assemblies and custom wire harness solutions, please contact our technical team.
Deseja saber mais detalhes sobre este produto